Browse all practice questions for the WJEC Design Technology Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

WJEC Design Technology Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which term describes the production of a single, unique product?
  • Which device is typically used to cut complex shapes from thin materials at relatively low cost?
  • Which material changes colour in response to temperature changes?
  • Which finishing step is primarily used to protect wood surfaces?
  • Which statement describes carbon fibre?
  • Define environmental impact of packaging and name two strategies to reduce it in design.
  • Which of the following is a main reason prototypes are used?
  • Which woodworking joint is quick to apply and commonly used for fast assembly?
  • In a composite material, what is the general purpose of combining constituents?
  • Which standard marking is commonly used to indicate safety compliance in the UK market?
  • Which term would you use to describe the ability to resist wear, scratching and indentation?
  • Why is packaging design important in product development beyond aesthetics?
  • What is rapid prototyping?
  • Fibreglass is made from extremely fine fibres of what?
  • Which term refers to a polymer-based material that is a flexible conductor under pressure, used in smart sensing?
  • Which term is described as encapsulating active substances in extremely small capsules?
  • What is a potential drawback of using MDF in damp environments, and how can this be mitigated?
  • Which term describes the ability to resist wear, scratching and indentation?
  • Which term best describes the material's ability to conduct electricity?
  • Which term describes the integration of design, manufacturing, and management through digital tools?
  • Which term describes the ability to withstand wear, pressure, or damage?
  • Which term describes the ability to withstand blows or sudden shocks without breaking?
  • Explain the difference between a 'tolerance' and a 'fit' in mechanical design.
  • Plywood is typically used for panels and structural components due to its layered veneer construction.
  • Extrusion moulding is described as...
  • What does piezoelectric material do?
  • Nitinol is a specific example of which category of materials?
  • Which statement correctly describes QA versus QC in manufacturing?
  • How do cultural and social considerations influence design decisions?
  • Which device can cut complex shapes from a variety of thin materials, at relatively low cost?
  • What is the role of environmental legislation in design practice?
  • In cradle-to-grave life cycle assessment, which stages are included?
  • What is an isometric drawing and why is it used in design communication?
  • What is a key property of High Density Polyethylene (HDPE)?
  • BSI stands for...
  • In the waste hierarchy, which step should influence design decisions first?
  • In a cam and follower mechanism, what is the main function of the follower?
  • Which term describes a continuous effect from a product?
  • Anthropometric measurements are the related science that measures what?
  • Which study deals with human body dimensions and how they affect design?
  • What does a design brief typically contain and why is it important?
  • Airbus is known as which?
  • Which statement describes PVC?
  • Quality Assurance (QA) is best described as...
  • Which of the following are examples of smart materials and their typical uses?
  • What is the waste hierarchy and how should it influence design decisions?
  • Which term describes a process in which active substances are coated by extremely small capsules?
  • Define anthropometrics and explain how it is used in product design.
  • Which sequence lists the stages of the Product Life Cycle?
  • What is the primary purpose of risk assessment in a design project?
  • Which of the following is a typical unit used for specifying length in engineering drawings?
  • Which material is described as tough and flexible?
  • Identify three common wood joining methods and one advantage each.
  • Which material can be shaped a number of times?
  • Which statement best describes the primary purpose of a packaging specification?
  • Which are three common measurement aspects used in engineering drawings and what do they represent?
  • Which smart material can conduct electricity and uses microencapsulation?
  • CNC stands for?
  • Which concept enables designers to quickly produce physical parts directly from digital models for testing?
  • Which production method is defined as producing goods in large batches in standard lot sizes?
  • Which term describes the environmental impact of a product over its entire life cycle?
  • Explain the concept of design for disassembly and its benefits.
  • Which term describes the ability to deform unusually by stretching along its length?
  • In product design, what does the term 'form and function' describe?
  • What is design for manufacture and assembly (DFMA) and give an example of how it can reduce costs.
  • Which term describes materials that sense environmental changes and react?
  • Which term describes a process that identifies the effect a product has on resources over its entire lifetime?
  • What is ergonomics?
  • Which term describes the ability of an object to transfer heat or electricity to another object?
  • CIM stands for?
  • Which term describes a material that remains pliable and can be reshaped repeatedly before setting?
  • Which term is another name for one-off production?
  • Which statement is true about composites?
  • Which material is described as hard wearing and durable?
  • What is an example of 2D CAD?
  • What is quality assurance in making a product and how does it differ from quality control?
  • Which term describes the ability to maintain shape under the application of force?
  • Which term refers to materials that combine multiple substances to create a material with enhanced properties?
  • CAM stands for?
  • CE stands for...
  • Which term would you use to describe the material's ability to permanently change in shape?
  • Which term is another name for mass production?
  • Define 'ductility' and provide an example of a material with high ductility.
  • Bethan Gray works with what kind of patterns?
  • Which describes mass production?
  • Which term would you use to describe the ability to withstand blows or sudden shocks without breaking?
  • What is the encapsulation treatment to prevent mosquito bites?
  • Which term refers to analyzing a product's resource use over its lifetime?
  • Which term refers to the study of the human body measurements?
  • Which term refers to materials that sense changes in the environment and respond to them?
  • How can value engineering be applied in product design?
  • Which statement correctly lists the three broad categories of metals?
  • Which term describes the ability to change into a liquid or molten state when heated to its melting point?
  • In terms of construction and typical use, how does hardboard (MDF/HDF) differ from plywood?
  • Which process involves extruding a tube of molten plastic between two halves of a mould and blowing air to form the product?
  • Which factor primarily determines whether an idea should proceed in a design project?
  • Which term describes the material's ability to be pulled to the point of fracture?
  • Which description best captures the role of testing during development?
  • Which is also a biometrics example besides DNA?
  • Name two finishes used on metal surfaces and their purposes.
  • Which two factors are critical when evaluating a design from a user-centered perspective?
  • What is an alloy?
  • What is a key property of Melamine Formaldehyde (MF)?
  • What is the primary purpose of sanding in wood finishing?
  • Which term corresponds to Foam, powder, sheet, granules and rod?
  • Which term describes materials made up of more than one material that combine to create a new material with different properties?
  • Which feature helps ensure interchangeability of parts in drawings?
  • Which term is used to describe the field concerned with optimizing product user interaction?
  • Which of the following questions would best be answered by a bill of materials (BOM)?
  • What does legibility and readability refer to in technical drawings?
  • What is meant by 'standards compliance' and why is it important in design and technology?
  • Which statement about non-ferrous metals is true?
  • What is a composite material and give two examples.
  • A hammer's form is designed to support its function of driving nails.
  • Which of the following is an example of biometrics?
  • Which term describes a continuous effect from a product?
  • What does feasibility assess in a design project?
  • Which statement about ferrous metals is true?
  • How do ergonomic adjustable features improve product accessibility?
  • What is reverse engineering and why might it be used in design and technology practice?
  • Which two finishing steps are commonly used to improve the surface quality of wood?
  • What does 'design for safety' mean, and give an example?
  • Which term describes the way a company can buy materials to make into products?
  • What does environmental impact of packaging entail?
  • What is one primary advantage of using a foam insert in product packaging?
  • What are the three types of metals?
  • Which type of metal is more prone to rust when exposed to moisture?
  • What best defines Just-in-time (JIT)?
  • Which process uses air to shape the plastic?
  • How does color theory influence product design and user perception?
  • Which statement describes the properties of LDPE?
  • Which statement best describes non-ferrous metals?
  • Which term describes the ability of a material to bend and then return to its original shape and size?
  • Which designer cares more about appearance than how it works?
  • Which term describes the property that defines how much force a material can withstand before breaking?
  • Which two properties of timber influence its suitability for a chair frame, and why?
  • Which term would you use to describe the ability to change into a liquid or molten state when heated to its melting point?
  • Which term describes a design approach where the environmental impact is considered during design?
  • Which technology is commonly used for rapid prototyping?
  • Which term describes the environmental impact of a product across its entire life?
  • Which statement describes Continuous Production?
  • Which joining method is described as a typical woodworking method for furniture, frames, and assemblies requiring disassembly?
  • Which description best describes melamine formaldehyde (MF)?
  • Which jobs use 3D CAD according to the material?
  • Which designer is known for prioritizing function over appearance?
  • Which of the following is NOT a stock form of plastic?
  • What are the two types of plastic?
  • Which term describes the allowable variation in a manufactured dimension?
  • Which statement correctly distinguishes injection moulding from rotational moulding?
  • Fibreglass is material made from extremely fine fibres of what?
  • What is rapid prototyping and name a technology besides 3D printing?
  • What is important when designing?
  • Which material is extremely lightweight yet strong?
  • Which definition describes batch production?
  • Which material can bend into different shapes and remember its original shape when heated?
  • Which process uses a screw thread to force plastic into a mould where it cools and solidifies?
  • Which term describes a flexible polymer containing tiny metal particles that is normally an insulator but becomes a conductor when squeezed?
  • What is an example of 3D CAD?
  • CAD stands for?
  • Which term would you use to describe the ability to deform unusually by stretching along its length?
  • Why can thermoplastics be recycled more easily than thermosetting polymers?
  • Which term describes a continuous effect from a product?
  • Which term describes the ability to transfer heat or electricity between objects?
  • Where is metal found?
  • Which is a correct description of the 7 R's?
  • Name two factors to consider when choosing a manufacturing process for a plastic product.
  • Which manufacturing process forms hollow items by heating and rotating a mould with plastic powder?
  • What is a life cycle assessment and which stages does it cover?
  • Which concept focuses on making products easy and comfortable to use?
  • What is vacuum forming and when is it typically used?
  • Vacuum forming involves...
  • What is hollow extrusion and identify a typical use?
  • Which designer cares more about how something works than appearance?
  • What is the difference between a bill of materials (BOM) and a packaging specification?
  • Which term describes how companies can buy premise products to use in making other products that they know will be the same from whoever they buy them from?
  • What are the stages of the Product Life Cycle?
  • Explain what a Pugh (decision-matrix) tool is used for in evaluating design ideas.
  • Which factor would most influence color choice for readability on a user interface?
  • Which process is described by a mould being created from wood or epoxy resin and a heated plastic sheet placed over it to form a shape?
  • Which manufacturing process injects molten plastic into a mould to create solid parts?
  • Quality Control (QC) is defined as...
  • Which production method is associated with producing goods in large numbers using machinery and assembly lines?
  • Name a technology suitable for rapid prototyping other than 3D printing.
  • Which term describes the ability of a material to permanently change in shape?
  • Which statement best describes rapid prototyping?
  • Which statement correctly describes thermoplastic recyclability?
  • Which term describes the use of computers to control machine tools in manufacturing?
  • What is the purpose of a risk assessment matrix and how is it used?
  • Injection moulding works by...
  • What is a prototype?
  • What describes one-off production?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy